#PANOLAPSE SOFTWARE MANUAL#
#PANOLAPSE SOFTWARE SOFTWARE#

To maintain this look, if you're shooting at say 5 second intervals, you'll ideally want a 2.5 second exposure time. The reason for this is that the traditional 'film look' is shot at 24fps with a 1/50s shutter speed (which is about a 2x factor).Īt this ratio, moving objects will appear blurred and blend from one frame to the next. Generally, you'll want to target about half your interval time. The shutter speed time matters if you want motion that flows together. Light meter shows under/over exposure (Nikon). RAW can usually save an image by up to 2 stops of light.

That's a good one to check for when it's time to adjust exposure. Some cameras have a 'light meter' on the LCD screens that indicate how under/over-exposed a scene is. Later, create a gradual blend by interpolating the exposure across the frames.ĪutoExposure analyzes file metadata for changes in camera settings,Īnd can interpolate frames with near-perfect exposures for smooth blending.

#PANOLAPSE SOFTWARE MANUAL#

Shoot in Manual mode and adjust the exposure every 10 minutes or so as the light changes. RAWBlend (with AutoExposure) automates 'Holy Grail' shots. The issue with bulb ramping is that you need to time the start/end exposures exactly for it to work. Firmware upgrades like MagicLantern for Canon can do this as well. The camera's auto-metering is unpredictable and you could lose the whole shot.Īnother technique is 'bulb ramping,' in which an external remote accessory interpolates yourĬamera's shutter speeds. Some people might recommend shooting in Aperture priortity 'auto mode,' but Is known as the 'Holy Grail timelapse,' since it can be difficult to do right. Getting the exposure right for the 'Holy Grail.'Ī timelapse shot during sunrise or sunset ('golden hour') with changing exposures

Ultimately, motion in timelapses is going to be restrictive, and the more movement options that you can add, the more creative flexibility you'll have. Panolapse can be combined with motorized systems as well to allow more artistic direction.

#PANOLAPSE SOFTWARE SOFTWARE#

Panolapse is a software workaround that acts like a motorized head. Getting the motion just right is a whole other issue,Īs well as transporting the sliding tracks, motors, batteries, etc., Usually cost a minimum of $1000 and are pretty complicated to set up since you'll want move-stop-move capability, in which the system stops while photographing to ensure no movement blur. Since the final video is relatively low-resolution (1920x1080HD or 1280x720), you can usually crop a scene in later if you need to change framing.Īs you become more advanced, you could consider replacing the tripod with a motion-controlled slider or motion-controlled head - these machines Ideally, lenses 24mm or wider on full-frame camera bodies are goodįor landscape, as well as for rotational panning with Panolapse. You'll also want a tripod and a wide-angle lens. Nikon's built-in intervalometer, and extra accessory for some Canons

Panolapse software